To Next PageTo Next PageWhy is my Mitsubishi Heavy Industries SRK20ZS-S not cooling or heating properly?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling or heating well, make sure the thermostat is set to a suitable temperature. Also, check if the air filter is clean and not clogged. Finally, ensure that all doors and windows are closed.
What to do if Mitsubishi Heavy Industries SRK20ZS-S is not cooling enough?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling well, check if direct sunlight is entering the room. Also, make sure there isn't a heat source in the room or too many people.
How to fix Mitsubishi Heavy Industries SRK20ZS-S Air Conditioner that won't turn on?
If your Mitsubishi Heavy Industries Air Conditioner isn't working, check if the power switch is turned on. Also, verify that the timer hasn't been set to the “ON” position. Finally, check for a power failure or a blown fuse.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 800 x 290 x 215 mm |
| Outdoor Unit Dimensions (WxHxD) | 780(+62) x 540 x 290(+59) mm |
| Energy Efficiency Class Cooling | A++ |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split |
| Power Consumption (Cooling) | 620 W |
| Outdoor Unit Weight | 26 kg |
| Noise Level (Outdoor Unit) | 50 dB |
Safety guidelines for installing the air conditioner unit.
Safety guidelines for operating the air conditioner.
Safety measures for moving or servicing the unit.
Instructions for inserting and replacing batteries in the remote control.
Detailed explanation of each button on the remote control.
Steps to set the current day and time on the remote.
How the unit automatically selects modes based on temperature.
How to set preferred temperature during AUTO mode.
How to operate the unit in different modes.
How to set a timer for the unit to stop automatically.
How to set a specific time for the unit to stop.
How to set a timer for the unit to start automatically.
Setting up recurring daily and weekly schedules.
How to set programs for specific days.
How to remove specific day programs.
Steps to diagnose and resolve common operational problems.
Situations requiring immediate dealer contact.
Explains error codes indicated by RUN light flashes.
