To Next PageTo Next PageWhat to do if my Mitsubishi Heavy Industries Air Conditioner won't restart?
If you cannot restart your Mitsubishi Heavy Industries Air Conditioner immediately after stopping it, please wait for three minutes. The three-minute protection timer in the microcomputer automatically starts up again.
Why Mitsubishi Heavy Industries SRK25ZGX-S Air Conditioner not blowing air in heating mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the HEATING operation, it's likely due to the unit preventing cold air from being blown out until the indoor heat exchanger warms up. Please wait 2 to 5 minutes for the air to start flowing.
Why Mitsubishi Heavy Industries SRK25ZGX-S not blowing air in DRY mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the DRY operation, it may be because the indoor fan stops to prevent re-evaporation of dehumidified moisture and to save energy.
Why does my Mitsubishi Heavy Industries SRK25ZGX-S emit steam when cooling?
If your Mitsubishi Heavy Industries Air Conditioner is emitting some steam during COOL operation, it may occur if the room's temperature and humidity are very high. It disappears as soon as the temperature and humidity decrease.
What is the gurgling sound from my Mitsubishi Heavy Industries SRK25ZGX-S Air Conditioner?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by liquid refrigerant moving within the piping of the indoor unit. Liquid refrigerant will be evaporated and become as gaseous refrigerant during passing through the pipe in order to absorb the heat inside the room.
What is the cracking sound from my Mitsubishi Heavy Industries SRK25ZGX-S?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the expansion and contraction of the plastic body due to temperature change of plastic material because of compressor’s alternative operation.
Why does the RUN light stay on after stopping my Mitsubishi Heavy Industries SRK25ZGX-S Air Conditioner?
If the RUN light stays on even though the Mitsubishi Heavy Industries Air Conditioner operation was stopped, it means that the RUN light blinks during CLEAN operation. Run light turns off when CLEAN operation ends.
What is the hissing sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a hissing or clicking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the operation of the refrigerant control valves or electric components.
What is the whistling noise from my Mitsubishi Heavy Industries SRK25ZGX-S outdoor unit?
The whistling noise heard from the outdoor unit of your Mitsubishi Heavy Industries Air Conditioner means that the revolution speed is picking up on the compressor.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Type | Split System |
| Energy Efficiency Rating (Cooling) | A++ |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 32 kg |
Important safety measures to follow before installing the unit.
Crucial safety guidelines for operating the air conditioner.
Details on HEAT, COOL, DRY, and AUTO operating modes.
Overview of features like timers, power modes, and airflow adjustment.
Identifies and explains the parts of the indoor unit.
Identifies and explains the parts of the outdoor unit.
Lists and describes the accessories supplied with the unit.
Explains the meaning of various indicator lights on the unit.
Instructions for opening, closing, and removing the air inlet panel.
Details the function of each button on the remote control.
Describes the information shown on the remote control's display.
Step-by-step guide for using the AUTO operating mode.
How to change temperature settings when in AUTO mode.
Explains how to select desired fan speeds for operation.
Instructions for operating in COOL, HEAT, and DRY modes.
Specifies the recommended operating temperature and humidity ranges.
Details the mechanism and defrosting process of the HEAT mode.
How to adjust vertical (up/down) and horizontal (left/right) airflow.
How to set and use the memory function for flap position.
Steps for setting and using the sleep timer function.
Steps for setting and using the off-timer function.
Steps for setting and using the on-timer function.
How to set both SLEEP and ON-TIMER operations simultaneously.
How to set a combined on and off timer program.
How amenity facilities optimize temperature before ON time.
Procedure to set the current time on the remote control.
How to use the high power mode for intense cooling/heating.
How to use the economy mode for energy saving.
How to run the CLEAN operation for the indoor unit.
Using the unit's ON/OFF button when the remote is unavailable.
Explanation of the auto restart function after power interruptions.
Steps for replacing exhausted batteries in the remote control.
Important precautions for handling the remote control.
What to do if the remote control fails to operate the unit.
Advice for economical and comfortable unit usage.
Instructions for cleaning the air filters.
How to clean the indoor unit and its panels.
Steps for preparing the unit for storage at the end of the season.
Checks and preparation for operating the unit at the start of the season.
Guide to installing and replacing special filters.
Checks to ensure the unit is installed correctly and safely.
Common problems and checks before contacting service.
Notes on unit restart limitations and protection timers.
Explanations for airflow behavior, defrosting, and odors.
Explanations for unusual sounds, indicator behavior, and moisture.
Scenarios that necessitate immediate contact with the dealer.
Explanation of error codes indicated by unit lights.
