Need help?Do you have a question about the Mitsubishi Heavy Industries SRK52CF-BN and is the answer not in the manual?
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SRK52CF-BN |
| Category | Air Conditioner |
| Language | English |
Details unit components, flap/louver control, and self-diagnosis function for operation abnormalities.
Explains the naming convention used for the SRK series air conditioners, breaking down the model code.
Lists detailed technical specifications for SRK52CF-BN and SRC52CF-BN indoor/outdoor units.
Defines the operational limits for indoor and outdoor air temperatures and refrigerant line length.
Provides dimensional drawings and measurements for the indoor unit, including mounting space.
Illustrates the refrigerant piping diagrams for different SRK models, showing component connections.
Shows charts for correcting cooling capacity based on temperature and refrigerant piping length.
Presents the electrical wiring diagram for the SRK52-CF-BN model, detailing connections.
Explains the operation and indication sections of the wireless remote control for unit functions.
Describes how to operate the unit directly using the ON/OFF button on the indoor unit.
Explains the function that automatically resumes operation after a power interruption.
Details how to modify indoor unit and remote control for dual installations to prevent signal interference.
Explains how to control flap and louver movement, including swing and memory functions.
Describes the comfortable timer function and its temperature-based adjustments to starting time.
Explains the sleep timer function and its temperature control adjustment over time.
Details the operation of key functional components during cooling mode.
Explains the operation blocks and steps for dehumidifying mode based on temperature difference.
Describes how the unit automatically determines the operation mode based on air temperatures.
Explains how to adjust set temperature and modify the range via PCB jumper.
Details fan speed settings for different operation modes and fan control logic.
Explains how outdoor fan speed changes based on outdoor air temperature for cooling and thermal dry.
Details component behavior during complete stop and thermostat-stop operations.
Explains external control outputs and input signal controls for integrated systems.
Describes how to control operation via jumper wire and external input signals for permission/prohibition.
Details frost prevention for the indoor heat exchanger, including operating conditions and reset.
Provides a table of indoor unit jumper settings, their functions, and default configurations.
Lists essential safety warnings and cautions for installation, covering electrical and refrigerant hazards.
Guides on choosing suitable indoor and outdoor unit locations, avoiding adverse conditions.
Details the installation of the indoor unit, including mounting board fixing and drilling procedures.
Provides instructions for stable installation and wiring of the outdoor unit, ensuring secure fixing.
Details the preparation, connection, and torquing of refrigerant piping between units.
Outlines the procedure for conducting a trial run, checking for leaks, and explaining usage to the customer.
Lists precautions for wireless remote control installation and operation distances and environmental factors.
Details modifying the indoor unit's circuit board for wired remote control installation.
Explains the functions and wiring connection diagram of the Super Link Adapter for multi-unit control.
Provides cautions, initial checks, and troubleshooting steps for electrical equipment issues.
Explains the evacuation procedure for purging impurities, and refrigerant charging process.
To Next Page
