To Next PageTo Next PageWhy is my Mitsubishi Heavy Industries SRR35ZS-W not cooling well?
There could be several reasons why your Mitsubishi Heavy Industries Air Conditioner isn't cooling effectively. Ensure that the thermostat is set to a suitably cool temperature. Check if the air filter is clean and not clogged. Also, make sure all doors and windows are closed to prevent warm air from entering the room.
How to fix a Mitsubishi Heavy Industries Air Conditioner that doesn't work?
If your Mitsubishi Heavy Industries Air Conditioner isn't working at all, check the following: - Ensure that the power switch is turned on. - Verify that the timer hasn't been set to the 'ON' position. - Check for a power failure or a blown fuse.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 845 x 290 x 228 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 540 x 290 mm |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Refrigerant | R32 |
| Noise Level (Indoor) | 21 dB (Low) |
Precautions regarding installation to ensure safe operation and prevent hazards.
Guidelines and warnings for safe operation of the air-conditioner.
Safety measures to follow when moving or repairing the air-conditioner.
Explanation of all buttons and indicators on the remote control.
Operation in COOL, HEAT, DRY, FAN modes, temperature limits, and heat mode characteristics.
Setting up automated daily schedules for operation.
Checks to perform before calling for service to resolve operational problems.
Situations requiring dealer assistance and contact information.
Interpreting error codes indicated by the RUN and TIMER lights.
