1110
Bluetooth® Operation with FUSE Hands-free Link System™
(if so equipped)
Folding and Stowing the Third Row Seat (if so equipped)
Getting Started:
Before using FUSE the first time, press the HELP button. This
will walk you through some tips and help set-up your voice
recognition profile.
For a list of compatible Bluetooth® devices please go to
http://www.mitsubishicars.com/MMNA/jsp/owners-site/
technology-features.do
To fold out the third row seat
To stow the third row seat
If you are having diculties operating your phone or
connecting to the system, please call Mitsubishi Handsfree at
(888) 702-4100.
Making a call by using the telephone number:
1. Press A button and Say “Dial.”
2. The voice guide says “Number please.”
3. Say the telephone number “XXX•••••••.”
4. The voice guide says “Dialing <number recognized>.”
Making a call using a phonebook:
1. Press A button and Say “Call.”
2. After the voice guide says “Name please.”
Say the name you want to call “XXX•••••••.”
3. If there is only 1 match, the voice guide says “Calling
<name>” and then the system will dial the telephone
number.
Receiving calls:
1. If an incoming phone call is received while the ignition
switch is in the “ACC” or “ON” position, with the audio
system OFF, the audio system automatically turns ON.
2. Press B button.
Hanging up a call:
1. Press C button.
To import a devices phonebook:
1. Press A button and Say “Phonebook.”
2. The voice guide will say “Select one of the following: new
entry, edit number, edit name, list names, delete, erase all,
or import contact.” Say “Import contact.”
3. The voice guide will say “Would you like to import a single
entry or all contact?” Say “All contacts.”
4. The voice guide will say “Importing the contact list from
the mobile phonebook. This may take several minutes to
complete. Would you like to continue?” Answer “Yes.”
5. When the import is complete, the voice guide will say
“Import complete.”
SPEECH button:
Change to voice
recognition
PICK-UP button:
Answer an
incoming call
HANG-UP
button
End a call
or voice
recognition
A
B
C
A
B
C
• Openthelowertailgate.
• Fromtherearofthevehicle,A
pull up the cover.
• Securethecovertothe
seatback with the strap B .
• Openthelowertailgate.
• Fromtherearofthevehicle,A
pull up the cover .
• SecurethecovertotheB
seatback with the strap
• PullonthestrapC
on the center of the
seatback to raise the
seatback upright.
• Pulltheblack strap D
to release the lock.
• Tiltthethirdrowseat
assembly backward.
• Pullthehead
restraints.
• PressthelockknobF
then insert the head
restraints into the
seatback.
• Liftupandpush
forward so that
the third row seat
is firmly secured.
A
A
E
F
G
H
C
B
B
C
D
F
• Whilepullingthegray
strap E , move the third
row seat backward and
downward to the floor
by holding the top of the
seat back.
• Ifitisdiculttolockthe
seat in place, return to its
original position, and then
lock it in place by pushing
down while pulling with
more force on the strap.
• Tilttheseatassembly
forward.
• PressthelockknobF ,
then pull the head
restraint up and out of
the seatback.
• Storetheheadrestraintsin
the front of the seatback by
inserting the knob G in the
hole H .
•Whilepullingonthe
strap C on the center
of the seatback, fold
the seatback down.
To pair a Bluetooth® enabled device:
1. Park your vehicle in a safe location.
2. Press A button and Say “Setup.”
3. Say “Pairing Options”
4. The voice guide says: “Select one of the following: pair,
edit, delete, or list.”
5. Say “Pair.”
6. The voice guide says “Please say a 4-digit pairing code.”
7. Say a 4-digit number “XXXX.”
8. When the confirmation function is on, the system will
confirm whether the number said is acceptable. Answer
“Yes.”
9. The voice guide says “Start pairing procedure on the
device. See the device manual for instructions.” Enter in the
Bluetooth® device the 4-digit number you have registered in
step 8.
To Next Page
Loading...
Need help?
General
