Mitsubishi 2013 Outlander User Manual

Features and controls
3-37
3
Procedure for replacing the remote control trans-
mitter battery
N00562100066
1. Before replacing the battery, remove static electricity from
your body by touching a metal grounded object.
2. With the Mitsubishi mark facing you, insert the cloth-cov-
ered tip of a flat blade screwdriver into the notch in the
case and use it to open the case.
N
OTE
● Be sure to perform the procedure with the Mitsubishi
mark facing you. If the Mitsubishi mark is not facing you
when you open the case, the transmitter may come out.
3. Remove the old battery.
4. Install a new battery with the + side (A) up.
5. Close the case firmly.
6. Check the keyless entry system to see that it works.
N
OTE
● You may purchase a replacement battery at an electric
appliance store.
● An authorized Mitsubishi Motors dealer can replace the
battery for you if you prefer.
CAUTION
!
● When the remote control transmitter case is opened,
be careful to keep water, dust, etc. out. Also, do not
touch the internal components.
+ side
- side
Coin type battery
CR2032
BK0150700US.book 37 ページ ２０１２年３月２２日 木曜日 午後６時４６分
Information Provided by:

Mitsubishi 2013 Outlander Specifications

General

Brand	Mitsubishi
Model	2013 Outlander
Category	Automobile
Language	English