Features and controls
3-63
3
Type 2
When the headlights of the vehicles behind you are very bright,
the reflection factor of the rearview mirror is automatically
changed to reduce the glare.
Normally, use the automatic mode. When the ignition switch is
turned to the “ON” position or the operation mode is put in
ON, the reflection factor of the mirror is automatically
changed.
OTE
● Do not hang items on, or spray glass cleaner on the sensor
(1), as reduced sensitivity could result.
Type 3
When the headlights of the vehicles behind you are very bright,
the reflection factor of the rearview mirror is automatically
changed to reduce the glare.
Normally, use the automatic mode. When the ignition switch is
turned to the “ON” position or the operation mode is put in
ON, the green indicator (1) illuminates and the reflection factor
of the mirror is automatically changed.
OTE
● Do not hang items on, or spray glass cleaner on the sen-
sors (2), as reduced sensitivity could result.
(Back side)
BK0150700US.book 63 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
