3-114
Features and controls
3
To resume the set speed
N00518900292
If the set speed driving is deactivated by the condition
described in “To deactivate” on page 3-113, you can resume
the previously set speed by pressing the “ACC RES” switch
(C) while driving at a speed of about 25 mph (40 km/h) or
higher.
Under either of the following conditions, however, using the
switch does not allow you to resume the previously set speed.
In these situations, repeat the speed setting procedure:
● The “ON OFF” switch is pressed.
● [Except for vehicles equipped with the F.A.S.T.-key]
Turn the ignition switch to the “OFF” or “ACC” position.
[Vehicles equipped with the F.A.S.T.-key]
Put the operation mode in OFF or ACC.
● “CRUISE” indicator light is turned OFF.
BK0150700US.book 114 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
