Seat and restraint systems
2-17
2
3. Make sure the seatback is locked securely in place and the
seat belt is passed through the seat belt guide (B).
4. If the center seat belt is stored in the rear trim, pull the seat
belt out and pass it through the seat belt guide (D) near the
center of the rear seat backs.
CAUTION
!
● If the red part (C) on the back of the rear seat
release button can be seen, the seatback is not locked
firmly in place. Push and pull lightly on the seatback
to lock it firmly in place.
BK0150700US.book 17 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
