7-60
Vehicle care and maintenance
7
5. To install the bulb, perform the removal steps in reverse. Daytime running lights (if so equipped)
N00902000061
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip info the light cover (A) and pry gently to
remove it.
CAUTION
!
● Handle halogen light bulb with care. The gas inside
a halogen light bulb is highly pressurized, so drop-
ping, knocking, or scratching a halogen light bulb
can cause it to shatter.
● Never hold the halogen light bulb with a bare hand,
dirty glove, etc. The oil from your hand could cause
the bulb to break the next time the fog lights are
used.
If the glass surface is dirty, clean it with alcohol and
let it dry completely before installing the bulb.
BK0150700US.book 60 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
