00-12
(2.2) Inspections on male terminals
• Perform the inspection by applying test probes directly to the
pins.
CAUTION
.
• Be careful not to short-circuit pins together with the test
probes. With control unit connectors, short-circuiting of
pins can cause damage to the control unit’s internal circuit-
ry.
• When using a multimeter to check continuity, do not allow the
test probes to touch the wrong terminals.
1.2 Inspection of connectors
(1) Visual inspection
• Check that the connectors are fitted together securely.
• Check whether wires have been separated from their terminals
due to pulling of the harness.
• Check that male and female terminals fit together tightly.
PRECAUTIONS FOR MAINTENANCE OPERATION
To Next Page
Loading...
