00
00-17
NOTE:
The Multi-Use tester tool will not be used to service the 6M60-TL diesel engine at this time. Please disregard
the Multi-Use Tester information. The Up-Time 2.41 or later software must be used to service the 6M60-TL
diesel engine.
1. Using Multi-Use Tester
1.1 Connecting Multi-Use Tester
Special tools
• Move the starter switch to the LOCK position.
• Connect , , and as illustrated.
• Connect the Multi-Use Tester connector on the vehicle with the
connector of .
Mark Tool name and shape Part No. Application
PC
FMSi-E06-1
(Multi-Use
Tester-III ver-
sion)
Data transmission to/from V.C.I.
V.C.I. N/A
Data transmission between electronic
control unit and PC
MH062928
Power supply to V.C.I. and communi-
cation with electronic control unit
Multi-Use Tester har-
ness A
Multi-Use Tester test
harness D
(used for extension)
MH062931
(1 m)
MH062951
(2 m)
Multi-Use Tester test harness A
extension
USB cable MB991827
Communication between V.C.I. and
PC
DIAGNOSTIC CODES
To Next Page
Loading...
