13E-42
B9 Fuel Leak Check
Increase rail pressure for a specified six seconds
[Can be executed under the following conditions]
• Vehicle: stopped (vehicle speed 0 km/h)
• Transmission: neutral
• Diagnostic switch: OFF (removal of fuse)
Check that no fuel leaks from fuel
system (pipe, hose)
BB Injector Test 1
Force the selected injector magnetic valve to be
deactivated.
[Can be executed under the following conditions]
• Vehicle: stopped (vehicle speed 0 km/h)
• Transmission: neutral
• No present diagnostic codes generated
Injector magnetic valve (No.1
cylinder) should stop.
BC Injector Test 2
Injector magnetic valve (No.5
cylinder) should stop.
BD Injector Test 3
Injector magnetic valve (No.3
cylinder) should stop.
BE Injector Test 4
Injector magnetic valve (No.6
cylinder) should stop.
BF Injector Test 5
Injector magnetic valve (No.2
cylinder) should stop.
C0 Injector Test 6
Injector magnetic valve (No.4
cylinder) should stop.
C2 Pump Adjustment Value Clear
Delete the compensation information (pump learn-
ing condition) in engine electronic control unit
The service data “4D: Pump Ad-
justment State” displays “Un-
learned”
No. Item Explanation Confirmation method
TROUBLESHOOTING
To Next Page
Loading...
