13E
13E-51
#828 Inspection of fuel injection rate adjustment resistor
• Measure the resistance of the resistor number marked on the
fuel injection rate adjustment resistor.
• If the measurement is out of specification, replace the fuel injec-
tion rate adjustment resistor with one that has the same resistor
number and same specified resistance.
CAUTION
• The fuel injection rate adjustment resistor is matched to the
engine. If you replace it, be sure to replace it with one that
has the same resistor number.
Standard value
(at 20°C)
Resistor
No.
1 270 ± 13.5 Ω
2 510 ± 25.5 Ω
3 820 ± 41 Ω
4 1300 ± 65 Ω
5 2000 ± 100 Ω
6 3300 ± 165 Ω
7 5600 ± 280 Ω
8 15000 ± 750 Ω
9 390 ± 19.5 Ω
10 4300 ± 215 Ω
11 9100 ± 455 Ω
To Next Page
Loading...
