Mitsubishi 6M60-TL - Cooling Fan and V-Belt

14-24
Disassembly sequence
Assembly sequence
Follow the disassembly sequence in reverse.
CAUTION
• When replacing the V-belts, replace them as a set to prevent differences in tension between the belts.
1 V-belt
2 Cooling fan
<Type B and Type C>
3 Fan spacer <Type B>
4 Fan spacer
<Type B and Type C>
5 Water pump pulley
6 Inlet pipe
7 Inlet hose
8 Tube <Type C>
9 Straight joint <Type C>
10 Grease nipple <Type C>
11 Connector <Type C>
12 Grease nipple bracket
<Type C>
*
a: Water pump
*
b: Crankshaft pulley
COOLING FAN AND V-BELT