00
00-21
3. Up-Time Service Tool Functions
3.1 Menu
Monitor menu
• Input Monitor
Indicates the input values of the controllers.
• Output Monitor
Indicates the output values of the controllers.
• Custom Monitor
Indicates the input/output values of the item select-
ed.
• Fault Status
Indicates all error codes occurring.
• Fault History
Indicates the fault data, such as the error codes and
hour meter data, stored in the controller.
Tool menu
• Set-up Option
Indicates or sets the Setup Option data.
• Oscilloscope
Graphs the input/output values. The oscillograph
can be stored as data.
• Active Test
Outputs the signal forcibly to check the operation of
the equipment selected.
• Connection Change
Designates the controller operated by the service
tool and the controller connected to it.
• Firmware Update
Updates the firmware of the controller connected.
212338
TABLE OF STANDARD TIGHTENING TORQUES
To Next Page
Loading...
