17
17-9
<Type A>
Removal sequence
Installation sequence
Perform installation by following the removal sequence in reverse.
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Mark Parts to be tightened Tightening torque Remarks
Clamp 4.9 {0.5} –
Clamp 4.0 to 5.0 {0.4 to 0.5} –
Mark Points of application Specified lubricant and/or sealant Quantity
O-ring Engine oil As required
1 Breather pipe
2 Breather hose
3 Breather hose
4 Oil hose
5 PCV valve bracket
6 Oil hose stay
7 Cap
8 O-ring
9 Element
10 PCV body
*
a: Rocker cover
*
b: Breather hose
: Non-reusable parts
PCV: Positive crankcase ventilation
BLOWBY GAS RETURN SYSTEM
To Next Page
Loading...
