20
6. Printing procedures (Basic prints)
Setting print size (S/L)
• Set the print size to "S" or "L" according to the ink sheet installed.
• The print size can be set on the menu screen displayed on the monitor.
• It is not necessary to set the size every time you print unless the size of the ink sheet is changed.
1 Press the MENU button.
• " MAIN MENU " is displayed.
2 Press the UP or DOWN shift button to select" 4. PRINT
PUSH [
] ".
3 Press the RIGHT
shift button.
• " Print Menu " is displayed.
• When the power is turned on, "MODE:S/L" is already selected in "4. PRINT PUSH
[ ] " at step 2. If other item is selected, press the UP or DOWN shift
button to select "MODE:S/L".
4 Press the RIGHT
or LEFT shift button to select “S” or “L” in the “MODE”.
To Next Page
Loading...
