29
7. Setting the functions
3
Press the SET
SET
button.
• " CHANGE : OK/CANCEL " is selected.
• Select "OK" to close the menu. Select "CANCEL" to cancel the setting again by the RIGHT or LEFT shift button.
4
Press the SET
SET
button.
• The function is set and the Main menu
display or Memory SW menu is shown.
5
Press the SET
SET
button.
• In the Main menu, "SAVE : 1/2/3" is selected.
Store the setting of function on the sub menu 1-6 to program 1.2 and 3. ( Refer to "SAVE"on the next page.)
• In the Memory SW menu, "CHANGE : OK/ CANCEL" is selected. When closing the menu, select "OK" by pressing the
RIGHT
or LEFT shift button.
6
Press the SET
SET
button.
• The function is set and the set condition is displayed.
To Next Page
Loading...
