FUEL SYSTEM - INSTALLATION
3 - 31
3.1 Installing the fuel injection nozzles
(1) Install the gaskets onto the fuel injection nozzles.
(2) Insert the fuel injection nozzles into the cylinder
head, and tighten to the specified torque.
3.2 Installing the fuel pipes
(1) Install the fuel leak-off pipe onto the fuel
injection nozzles.
(2) Install the fuel injection pipes, and hold them in
place with clamps.
(3) Tighten the fuel leak-off and fuel injection pipe
nuts to the specified torques.
Installing the fuel injection nozzles
Installing the fuel pipes
Replace: Gasket
Tightening torque:
49.0 to 58.8 N㨯m
(5.0 to 6.0 kgf㨯m)
[36.2 to 43.4 lbf㨯ft]
Tightening torque for
fuel injection pipe nuts
24.5 to 34.3 N m
(2.5 to 3.5 kgf
m)
[18.1 to 25.3 lbf
ft]
Tightening torque for
fuel leak-off pipe nuts
20.6 to 24.5 N
m
(2.1 to 2.5 kgf
m)
[15.2 to 18.1 lbf
ft]
To Next Page
Loading...
