Mitsubishi diesel engines - Oil Filter, Relief Valve and Oil Pressure Switch

OIL SYSTEM - INSTALLATION
4 - 10
1. Oil Filter, Relief Valve and Oil Pressure Switch
Tightening torque:
44.1 to 53.9 N
m
(4.5 to 5.5 kgf
m)
[32.5 to 39.8 lbf
ft]
Tightening torque:
10.8 to 12.7 N
m
(1.1 to 1.3 kgf
m)
[8.0 to 9.4 lbf
ft]
Tightening torque:
7.85 to 11.8 N
m
(0.8 to 1.2 kgf
m)
[5.8 to 8.7 lbf
ft]
Installation of the oil filter, relief valve and oil pressure switch
<Installation sequence>
③→②→①
1.1 Installing the oil pressure switch
(1) Using the special tool Oil Pressure Switch Socket
Wrench, tighten the switch to the specified
torque.
Special tool Part number
Oil Pressure Switch Socket
Wrench
MD998054
(2) Apply sealant (ThreeBond 1102) onto the
threaded portion of the switch.
(a) Apply proper amount of sealant so that it will
not be squeezed out to the tip of the
threaded portion.
(b) Do not overtighten.
Installing the oil pressure switch
MD998054
Apply sealant here.
Tightening torque:
7.85 to 11.8 N
m
(0.8 to 1.2 kgf
m)
[5.8 to 8.7 lbf
ft]