ENGINE MAIN PARTS - DISASSEMBLY
2 - 15
3.8 Separating the piston from the
connecting rod
(1) Remove the piston pin using the special tool
Piston Pin Setting Tool.
Special tool Part number
Piston Pin Setting Tool 31A91-00100
(2) Insert the tool’s push rod into the piston pin hole.
Using a press against the push rod, extract the
piston pin.
(3) Use the Piston Pin Setting Tool again to
reassemble the piston and the connecting rod.
Do not try to remove the piston pin by tapping
it.
If the piston has been agglutinated and
requires a great force to remove, replace it
with a new part.
Piston Pin Setting Tool
Removing the piston pin (1)
Removing the piston pin (2)
Push rod
Connecting rod
Identification mark
Tool body
Piston pin
Piston
arrow mark
Piston
To Next Page
Loading...
