Mitsubishi Eclipse 1990 - Page 43

GENERAL
Maintenance
Generator pulley
Crankshaft
Water pump
pump
GENERATOR AND WATER PUMP DRIVE
CHECK
Engine (Turbo) and Engine>
Check the belt tension with the tension gauge, or check the
belt deflection by pressing. the middle point of belt by
force of 98 (22 Ibs.).
Standard value:
Tension (Ibs.)
Deflection mm (in.)
<Reference value>
245 490 (55.1
9.0 11.5
,
Engine (Non-turbo)>
Check the belt tension with the tension gauge at the middle
point of the belt, or check the belt deflection by pressing,
the belt point by a force of 98 (22 Ibs.).
.
Standard value:
Tension (Ibs.)
Deflection mm (in.)
<Reference value>
4 00 490 (90 --
9.0 12.0
POWER STEERING PUMP DRIVE BELT TENSION CHECK
Engine (Turbo) and Engine>
1. Pull or push at the mid point of the belt with a force
of 98 (22 Ibs.) to measure dirve belt deflection.
Standard value: mm in.)
2. Use a tension gauge to measure belt tension.
Standard value:
TSB Revision