Main and Adhesive Table
MAIN SEALANT AND ADHESIVE TABLE
SEALANTS FOR ENGINE ACCESSORIES
Application
Recommended brand
Sealing between rocker cover and camshaft bearing cap DOHC ATD Part No. 8680 or equivalent
and engines only)
1
Sealing between semi-circular packing and rocker cover and between
semi-circular packing and cylinder head
Oil pressure switch (except and engines)
. . .
Engine coolant temperature switch, Engine coolant temperature sensor,
Nut Locking Part No. 4171 or
valve, switch, Joints, Engine coolant temperature lent
gauge unit (large size)
Engine coolant temperature gauge unit (small size, only)
ATD Part No. 8660 or equivalent
Oil pan (except engine)
MITSUBISHI GENUINE ‘Part
0 or equivalent
SEALING BETWEEN GLASS AND WEATHERSTRIP
Application
Sealing between tempered glass and weatherstrip
Sealing between body flange and weatherstrip
Sealing between laminated glass and weatherstrip
Recommended brand
ATD Part No. 8513 or equivalent
ATD Part No. 8509 or equivalent
ADHESION WITH RIBBON SEALER
Application
Recommended brand
Waterproof film for door, Fender panel, Splash shield, Mud guard, Rear ATD Part No. 8625 or equivalent
combination light
ADHESIVES FOR INTERIOR TRIM
Application Recommended brand
I
Adhesion of polyvinyl chloride sheet
I
Part No. 368 or equivalent
I
Adhesion of door weatherstrip to body ATD No. 8001 or ATD Part No.
8011 or equivalent
Sealing between grommet or packing, and metal seal
Adhesion of headlining and other interior trim materials
Adhesion of fuel tank to pad
ATD Part No. 8513 or equivalent
Part No. or ATD Part No.
8080 or equivalent
BODY SEALANT
Application
Recommended brand
I
Sealing of sheet metal, drip rail, floor, body side panel, trunk, front panel
ATD No. 8531 or ATD Part No.
and the like joints
8848
or equivalent
Sealing of hinges
TSB Revision
To Next Page
Loading...
