On-vehicle
98 (22
Generator
pulley
pulley
v
pulley
ON-VEHICLE
DRIVE BELT TENSION CHECK’ AND
ADJUSTMENT
GENERATOR DRIVE BELT
Use the belt tension gauge to check belt
the
shown
point or deflection by applying 98 (22 tbs.) to
shown point.
Standard value:
Tension: 245 490 (55.1 110.2
Deflection <Reference
9.0 1 1.5 mm in.)
GENERATOR DRIVE BELT TENSION ADJUSTMENT
1. Loosen the nut of the generator pivot bolt.
2. Loosen the lock bolt.
3.
Turn the adjusting bolt to adjust the belt tension or deflec-
tion to the standard value.
Standard value:
Items
When a new belt is
installed
When
a used belt is
installed
Tension
392
(88.2)
I
Deflection
10.0
mm (in.)
4
Tighten the nut of the generator pivot bolt.
Tightening torque: 23 Nm (17
5. Tighten the lock bolt.
Tightening torque: 23 Nm (17
6. Tighten the adjusting bolt.
Tightening torque: 10 Nm (7
TSB Revision
To Next Page
Loading...
