Need help?Do you have a question about the Mitsubishi FB18KT and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | FB18KT |
| Category | Boom Lifts |
| Language | English |
Explains the meaning of safety warning symbols used throughout the manual.
Illustrates a component's disassembly sequence and provides part identification.
Contains specific technical values and limits for component service and repair.
Details the manual's use of SI units and provides conversions to customary units.
Provides a general overview of the main controller's function and purpose.
Identifies and illustrates the primary electrical and mechanical components of the controller.
Identifies and illustrates secondary electrical and mechanical components of the controller.
Details the components and connectors found on the main controller's logic card.
Lists the different controller models and their specific technical data and settings.
Explains the sequence of operations and modes for the main controller.
Describes how the controller manages the forklift's drive motors and performance.
Details the controller's regenerative braking functions, modes, and priorities.
Presents graphs showing armature and shunt current related to lever regeneration.
Presents graphs showing armature and shunt current related to automatic regeneration.
Illustrates steering control parameters for the 1.6-ton model.
Illustrates steering control parameters for the 1.8-ton model.
Illustrates steering control parameters for the 2.0-ton model.
Explains the operation of hydraulic control models and related signals.
Describes the safety mechanisms and responses implemented by the controller.
Details how the controller manages output power when battery voltage is low.
Covers overheat conditions for motors and the controller, including error codes.
Addresses brush wear issues for drive motors and pump motors with error codes.
Explains how the controller limits the maximum travel speed of the vehicle.
Defines current limits for drive motors during service and parking brake application.
Describes the timer function that initiates 'chat mode' under specific conditions.
Explains the timer that turns off the line contactor when the operator leaves the seat.
Outlines the process for detecting and diagnosing system malfunctions.
Explains how error codes and related data are stored and reviewed.
Covers general settings and adjustments for the controller's printed circuit board.
Details various configurable parameters and their default values for controller operation.
Provides instructions for performing self-diagnostic tests on the controller.
Describes additional operational features and functionalities of the controller.
Explains the indicators and information displayed on the controller's unit.
Details how vehicle speed and error codes are presented on the display.
Explains the meaning and activation of various indicator lights on the controller.
Lists and describes the configurable options for Group 1 settings.
Lists and describes the configurable options for Group 2 settings.
To Next Page