Mitsubishi FR-E520-0.1K-NA - Page 8

II
3 OPERATION/CONTROL 48
3.1 Pre-Operation Information ........................................................................................48
3.1.1 Types of operation modes..................................................................................48
3.1.2 Power on ............................................................................................................50
3.2 About the Control Panel............................................................................................51
3.2.1 Names and functions of the control panel (FR-PA02-
02
)....................................51
3.2.2 Control panel mode is changed by pressing the
MODE
key.................................52
3.2.3 Monitoring...........................................................................................................52
3.2.4 Frequency setting...............................................................................................53
3.2.5 Parameter setting method..................................................................................53
3.2.6 Operation mode..................................................................................................55
3.2.7 Help mode..........................................................................................................55
3.3 Operation..................................................................................................................58
3.3.1 Pre-operation checks .........................................................................................58
3.3.2 External operation mode (Operation using the external
frequency setting potentiometer and external start signal).................................59
3.3.3 PU operation mode (Operation using the control panel) ....................................60
3.3.4 Combined operation mode 1
(Operation using both external start signal and control panel)...........................61
3.3.5 Combined operation mode 2..............................................................................62
4 PARAMETERS 63
4.1 Parameter List...........................................................................................................63
4.1.1 Parameter list .....................................................................................................63
4.1.2 List of parameters classified by purpose of use .................................................69
4.1.3 Parameters recommended to be set by the user ...............................................71
4.2 Parameter Function Details ......................................................................................72
4.2.1 Torque boost (Pr. 0, Pr. 46)................................................................................72
4.2.2 Output frequency range (Pr. 1, Pr. 2, Pr. 18)......................................................73
4.2.3 Base frequency, base frequency voltage (Pr. 3, Pr. 19, Pr. 47) .........................74
4.2.4 Multi-speed operation (Pr. 4, Pr. 5, Pr. 6, Pr. 24 to Pr. 27, Pr. 232 to Pr. 239) .75
4.2.5 Acceleration/deceleration time (Pr. 7, Pr. 8, Pr. 20, Pr. 21, Pr. 44, Pr. 45) .......76
4.2.6 Electronic overcurrent protection (Pr. 9, Pr. 48) .................................................78
4.2.7 DC injection brake (Pr. 10 to Pr. 12)...................................................................79