1 BCN-C22005-986
FR-F800 Series
Instruction Manual Supplement
1 Monitoring terminals S1 and S2 (FR Configurator2)
Graph display using FR Configurator2 is supported for terminals S1 and S2 (data from the high speed sampling and
the USB trace file).
The state of terminals S1 and S2 can be displayed in graph form using FR Configurator2.
The FR Configurator2 version 1.28E or later supports graph display for terminals S1 and S2.
For details on FR Configurator2, refer to the FR Configurator2 Instruction Manual.
Digital source (monitor item) selection
• Terminals S1 and S2 can be selected as digital sources for the trace function.
• Select the digital sources (input/output signals) to be set to Pr.1038 to Pr.1045 from the following table. When a
value other than the ones in the following table is set, "0" (OFF) is applied for indication.
Setting
value
Signal
name
Setting
value
Signal
name
Setting
value
Signal
name
1 STF 21 X0 101 RUN
2 STR 22 X1 102 SU
3 AU 23 X2 103 IPF
4 RT 24 X3 104 OL
5 RL 25 X4 105 FU
6 RM 26 X5 106 ABC1
7 RH 27 X6 107 ABC2
8 JOG 28 X7 121 DO0
9 MRS 29 X8 122 DO1
10 STP(STOP) 30 X9 123 DO2
11 RES 31 X10 124 DO3
12 CS 32 X11 125 DO4
15 S2 33 X12 126 DO5
16 S1 34 X13 127 DO6
35 X14 128 RA1
36 X15 129 RA2
37 DY 130 RA3
BCN-C22005-986_ENG.fm 1 ページ ２０２２年４月２０日 水曜日 午後３時５６分
To Next Page
Loading...
