Operation panel (FR-LU08-01)
INSTALLATION AND WIRING
51
2
2.7.2 Outline of the Main monitor indicator
Symbol Name Description
a Main monitor item/data
Displays the output frequency, output current, output voltage, faults history, and others.
The Main monitor screen can be changed by the following methods.
• Shifting the Main monitor screen using or
• Changing the main monitor item using the Function menu
• Changing the main monitor item using Pr.52 Operation panel main monitor selection
(For the details, refer to the Instruction Manual of the FR-LU08(-01).)
b Rotation direction
Displays the direction of the start command ([STF]: forward, [STR]: reverse).
([---] shows that no start command is input, or that both forward and reverse directions are ON.)
c Operating status
Displays the operating status of the inverter.
[STOP]: During stop
[FWD]: During forward rotation
[REV]: During reverse rotation
[JOGf]: During JOG forward rotation
[JOGr]: During JOG reverse rotation
[ALARM]: At fault occurrence
dClock
Displays time. With a battery installed, the clock keeps working even if the inverter power is turned
OFF. (For the details, refer to the Instruction Manual of the FR-LU08(-01).)
e Tuning status
Displays the offline auto tuning status of the inverter.
[TUNE]: During turning or tuning completed
[TUNE] highlighted and flickering: Tuning error
f
USB connection/
password locked
Displays the connection status of the USB A connector of the inverter and password function setting
status.
[USB-A]: USB connection recognized
[USB-A] highlighted: USB ready
[USB-A] flickering: During USB operation
[LOCK]: Password locked
g
PLC function/JOG
operation
Displays the status of the PLC function and JOG operation.
[P.RUN]: During stop with the PLC function enabled
[P.RUN] highlighted: During PLC function operation
[P.RUN] highlighted and flickering: Operation error in the PLC function
[JOG]: JOG operation enabled
h Warning Displays an inverter warning.
i Unit Shows the unit of the value on the main monitor.
j Operation mode
Displays the operation mode.
[AUTO]: AUTO (External) operation mode
[HAND]: HAND (PU) operation mode
[EXTj]: AUTOJOG (External JOG) operation mode
[PUj]: HANDJOG (PUJOG) operation mode
[NET]: Network operation mode
[PU+E]: AUTO (External) / HAND (PU) combined operation mode
k Software key Displays operations performed by pressing the F1 (left), F2 (center), or F3 (right) keys.
lScroll
Displayed when any data can be scrolled by turning .
PREV
SET
NEXT
STF
STOP
HAND
Hz
0. 00
Output frequency
TUNE USB- A P. RUN
12: 34
OL
▼
▲
(a)
(b)
(c)
(e)
(f)
(d)
(h)
(g)
(i)
(j)
(k)
(k)
(l)
(PREV)
(NEXT)
To Next Page
Loading...
