12
3-2-3 Setting the trend data format
The data format to be used when the trend graph data of
the measured value is downloaded can be set.
(1) Select the separator character between [Comma
( , )] and [Semicolon ( ; )].
(2) Select the decimal point character between [Dot ( . )]
and [Comma ( , )].
Note: Regardless of the settings on the screen above, the data collection intervals and data storage duration for the function of
the outdoor units that measure the electric power will be fixed for each data type.
Electric Energy (kWh) is the cumulative amount for each successive 30-minute period, Electric Power (kW) shows the
maximum value in each successive 5-minute period, and Efficiency shows the average efficiency values that are taken at
5-minute intervals. These data are retained for up to 62 days.
To Next Page
Loading...
