Mitsubishi HS-M1000 User Manual

ENGLISH
PLAYBACK
TO PLAY BACK A PRE-RECORDED CASSETTE PROCEED
AS FOLLOWS.
REW button’ FF button
BASIC OPERATION
Load a pre-recorded tape.
e ifacassette with the erasure prevention tab removed is
loaded the unit automatically switches to play mode and
playback begins.
Turn ON the TV and set it to the Video Channel.
@ If necessary, set the COLOUR SYSTEM of the VCR MENU
to the appropriate position. (See COLOUR SYSTEM on the
right.)
Press the PLAY button to start playback.
EY Press the STOP button to stop playback.
Wi REWINDING
Press the REW button to rewind the tape.
Mi FAST FORWARD
Press the FF button to run the tape fast forward.
AUTOMATIC REWIND MECHANISM
When the tape reaches the end in the recording, playback or
forward speed search mode, itis rewound automatically, and
then stops.
The automatic rewind does not work when the tape reaches
the end in the following situations:
e@ Blank search
One touch timer recording
Programmed recording
Search by time
Index search
e Fast forward or rewind can be engaged only when the VCR
is in the stop mode. If selected during playback, speed search
mode will be engaged.
19
COLOUR SYSTEM
When playing back a tape recorded in MESECAM, set the
COLOUR SYSTEM of the VCR MENU to MESECAMas follows.
Press the MENU button.
(The VCR MENU appears on the TV screen.)
Turn the JOG dial to move the cursor until itis to the left of item
COLOUR SYSTEM.
VCR MENU
PROGRAMME T!MER
ALL INDEX SEARCH
FF TO BLANK PORTION
SEARCH BY TIME
INITIAL SET-UP
COLOUR SYSTEM(
RECORD MODE
PAL
SP
NEXT: SHUTTLEP
EX1T:MENU
:JOG-
»JOG+
Set the COLOUR SYSTEM to MESECAM by turning the
SHUTTLE ring right.
Press the MENU button to exit the VCR MENU.
e This VCR does not play back a tape recorded in SECAM.
e When playing back a tape recorded in MESECAM at LP
mode, the colour noise may appear.
1. This set is for exclusive use with the PAL colour system
(system B and G).
2. SECAM (system B and G) colour programmes can be recorded
in certain areas but there is no interchangeability of these
recorded cassette tapes with other PAL-VHS recorders or
SECAM-VHS recorders.
3. Please use the excluseve SECAM-VHS recorder in French
SECAM broadcasting areas.
4. Please use only PAL pre-recorded cassette tapes of PAL
signals which have been recorded with the PAL-VHS system.
NTSC PLAYBACK (ON PAL TV)
Tapes recorded in NTSC can be played back with this VCR via
a PAL system TV sets.
e Depending on types of TV sets used, the picture may shrink
vertically and black bars both the top and bottom on the
screen. This is not an indication of a malfunction.
e@ The playback picture may roll up and down.
If the TV set is equipped with a V-HOLD control, it may be
possible to stop the picture movement by adjusting this
control.
However, TVs not equipped with a V-HOLD control cannot
correct this condition.
e During special playback, the picture may not be in colour.
Recording in the NTSC system is not possible with this VCR.
e This function is designed only to allow the playback of tapes
recorded by NTSC signals on a PAL system TV. The NTSC
signal is not completely converted to a PAL signal. For this
reason, images played back by this function cannot be
recorded on another VCR.
e The Hi-Fi sound recorded in NTSC cannot be played back.
Only NORMAL sound is played back.
e The noise may appear on the screen when playing back a
tape recorded at LP in S-VHS system.
e@ The noise may appear on the screen when playing back a
tape recorded at EP.

Mitsubishi HS-M1000 Specifications

General

Brand	Mitsubishi
Model	HS-M1000
Category	VCR
Language	English