IV
CAUTION
Store and use the units under the following environment conditions.
Conditions
Environment
Servomotor Interface unit
Ambient
temperature
0°C to +40°C
(with no freezing)
0°C to +55°C
(with no freezing)
Ambient humidity
80% RH or less
(with no dew condensation)
90%RH or less
(with no dew condensation)
Storage temperature
–15°C to +65°C
(with no freezing)
–20°C to +65°C
(with no freezing)
Storage humidity
90% RH or less (with no dew condensation)
Atmosphere
Indoors (Where unit is not subject to direct sunlight)
With no corrosive gas, combustible gas, oil mist or dust.
Altitude 1000m or less above sea level
HS-RF
HS-SF
(1kW or less)
X: 9.8m/sec
2
(1G)
Y: Y: 24.5m/sec
2
(2.5G) or less
HS-SF
(2.0kW or
less)
X: 19.6m/sec
2
(2G)
Y: 49m/sec
2
(5G) or
less
Vibration
HS-MF
X: 19.6m/sec
2
(2G)
Y: 19.6m/sec
2
(2G)
or less
5.9m/sec
2
(0.6G) or less
Securely fix the servomotor to the machine. Insufficient fixing could lead to the
servomotor deviating during operation.
Never touch the rotary sections of the servomotor during operations. Install a cover, etc.,
on the shaft.
When coupling to a servomotor shaft end, do not apply an impact by hammering, etc.
The detector could be damaged.
Do not apply a load exceeding the tolerable load onto the servomotor shaft. The shaft
could break.
When storing for a long time, please contact your dealer.
To Next Page
Loading...
Need help?
General
