Mitsubishi Mirage 2015

TIRE PRESSURE MONITORING SYSTEM (TPMS) DIAGNOSIS
TSB Revision
WHEEL AND TIRE
31-14
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch (engine starting switch) to the ON
position.
3. Select "Interactive Diagnosis" from the start-up screen.
4. Select "System select."
5. Choose "TPMS" from the "CHASSIS" tab.
6. Select "MITSUBISHI."
7. Select "Diagnostic Trouble Code."
8. If a DTC is set, it is shown.
9. Choose "Erase DTCs" to erase the DTC.
NOTE: Past trouble only
HOW TO READ DATA LIST
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch (engine starting switch) to the LOCK (OFF)
position before connecting or disconnecting scan tool
MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch (engine starting switch) to the ON
position.
3. Select "Interactive Diagnosis" from the start-up screen.
4. Select "System select."
5. Choose "TPMS" from the "CHASSIS" tab.
6. Select "MITSUBISHI."
7. Select "Data List."
8. Choose an appropriate item and select the "OK" button.
ACC02853
MB992747, MB992748, MB991827
MB992744, MB991824
AB
MB992745, MB991910
Data link connector
ACC02853
MB992747, MB992748, MB991827
MB992744, MB991824
AB
MB992745, MB991910
Data link connector