7. PARAMETERS
7 - 49
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
CP CL
PD04
*DI1H
Input device
selection 1H
Any input device can be assigned to the CN1-15 pin.
_ _ x x Not used with the positioning mode. 02h
x x _ _ Positioning mode - Device selection
Refer to table 7.9 for settings.
02h
Table 7.9 Selectable input devices
Setting
value
Input device (Note)
CP CL
0 2 _ _ SON SON
0 3 _ _ RES RES
0 4 _ _ PC PC
0 5 _ _ TL TL
0 6 _ _ CR CR
0 7 _ _ ST1 ST1
0 8 _ _ ST2 ST2
0 9 _ _ TL1 TL1
0 A _ _ LSP LSP
0 B _ _ LSN LSN
0 D _ _ CDP CDP
1 2 _ _ MSD MSD
1 E _ _ CLTC CLTC
1 F _ _ CPCD CPCD
2 0 _ _ MD0 MD0
2 1 _ _ CAMC CAMC
2 3 _ _ TCH
2 4 _ _ TP0 TP0
2 5 _ _ TP1 TP1
2 6 _ _ OVR OVR
2 7 _ _ TSTP TSTP
2 9 _ _ CI0 CI0
2 A _ _ CI1 CI1
2 B _ _ DOG DOG
3 0 _ _ LPS
3 1 _ _ CI2 CI2
3 4 _ _ PI1
3 5 _ _ PI2
3 6 _ _ PI3
3 7 _ _ CI3 CI3
3 8 _ _ DI0 DI0
3 9 _ _ DI1 DI1
3 A _ _ DI2 DI2
3 B _ _ DI3 DI3
3 C _ _ DI4
Note. CP: Positioning mode (point table method)
CL: Positioning mode (program method)
The diagonal lines indicate manufacturer settings. Never change the
setting.
PD12
*DI5H
Input device
selection 5H
Any input device can be assigned to the CN1-19 pin.
_ _ x x Not used with the positioning mode. 07h
x x _ _ Positioning mode - Device selection
Refer to table 7.9 in [Pr. PD04] for settings.
38h
To Next Page
Loading...
