3 - 3 3 - 3
MELSEC-Q
3 SPECIFICATIONS
Table 3.2 Performance Specifications of Q62AD-DGH (2/2)
Model name
Item
Q62AD-DGH
Maximum number of writes for
E
2
PROM
100,000
Number of I/O occupied points 16 points
External interface 18 points terminal block
Applicable wire size 0.3 to 0.75mm
2
Applicable solderless terminals R1.25-3 (Solderless terminals with sleeves are not applicable)
External supply power
24VDC +20%, -15%
Ripple, spike within 500mV
P-P
Inrush current : 5.5A, within 200µs
0.19A
Internal current consumption (5VDC) 0.33A
Weight 0.19kg
1: Accuracy of offset/gain setting at ambient temperature
Q62AD-DGH needs to be powered on 30 minutes prior to operation for compliance to the specification
(accuracy).
2: "digit" indicates a digital output value.
3: Accuracy per temperature change of 1°C
Example) Accuracy when temperature changes from 25 to 30°C
0.05% (reference accuracy) + 0.00714 %/°C (temperature coefficient)
5°C (temperature
change difference) = 0.0857%
4: User range setting is 2 to 24mA.
5: For details on the I/O conversion characteristics, refer to Section 3.1.2 (2).
6: Maximum resolution in the user range setting.
REMARK
For the general specifications of the A/D converter module, refer to the user’s
manual for the CPU module used.
To Next Page
Loading...
