Mitsubishi SCM80ZA User Manual

75
¡ The flap operation as shown above will be repeated.
Sway operation
Sway operation
(4) Flap control
Control the flap by AIRFLOW button on the wireless remote controller.
(a) AUTO
The flap will be automatically set to the angle of air flow best to operation.
1) Starting time of operation
¡ The flap operation as shown above will be repeated.
¡ SKM22, 25, 28, 32, 40 models
¡ SRRM40 model
s
In case of cooling
t
and dry operation
s
In case of heating
t
operation
(Horizontal blowing) (Slant forward blowing)
2) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
¡ SKM50 model
s
In case of cooling
t
and dry operation
s
In case of heating
t
operation
Stops at the level position
for one minute.
Stops at this position
for approximately 5
seconds.
Thick line
Thin line
:
Moves quickly
:
Moves slowly
Stops at this position for
approximately 5 seconds.
Thick line
Thin line
:
Moves quickly
:
Moves slowly
s
In case of cooling
t
and dry operation
s
In case of heating
t
operation
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html

Mitsubishi SCM80ZA Specifications

General

Brand	Mitsubishi
Model	SCM80ZA
Category	Air Conditioner
Language	English