– 8 –
Unit display section
Name of each part and its function
• Buzzer sound for remote control
Buzzer sound (PipPip) is produced when
preset temperature is set to 24 °C or,
AUTO operation mode is selected or,
automatic airflow is selected.
Buzzer sound (Pip) is produced when
air-conditioner is turned off by pressing ON/OFF button (except SELF CLEAN mode).
NOTE
Preset temperature
Airflow setting
Remote control Remote control
holder
Filter holder ×2
Allergen clear filter
(Light orange)
Photocatalytic washable
deodorizing filter (Orange)
Battery ×2
(R03 (AAA, Micro))
Wood screw ×2
(for remote control holder mounting)
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off
the unit when a remote control is not available.
Page 9
Remote control signal receiver
Unit ON/OFF button
RUN light (green)
Accessories
• Illuminates during operation.
• Blinks slowly when SELF CLEAN
operation (3 seconds ON, 1 second
OFF).
• Blinks when airflow is stopped to
prevent blowing out of cold air in
heating operation. (1.5 seconds ON,
0.5 seconds OFF)
Page 27
Page 31
• RUN lights blink quickly during invalid operation mode.
Page 32
Page 17-23
RLF012A104_EN.indd 8RLF012A104_EN.indd 8 1/13/2017 6:35:40 PM1/13/2017 6:35:40 PM
To Next Page
Loading...
