Turntable Assembly
A. Headshell:
Insert the Headshell into the front end of the Tonearm Assembly. While holding Headshell
firmly into the front end of the tonearm assembly, turn the Headshell Locking Nut counter-
clockwise to firmly secure the Headshell to Tonearm Assembly.
B. Counterweight:
Locate and remove the tonearm Counterweight from the packaging.
Slide Counterweight onto the rear of the Tonearm.
Turn it lightly and it will screw onto the rear shaft of the tonearm.
EN 4
To Next Page
Loading...