8
5 Pairing with Wireless Devices
5.1 Pairing the Headphones with a Computer
Before pairing the headphones with your computer, please make sure your
computer or laptop has the built-in Wireless feature. If not, you must
purchase a Wireless dongle, preferably version 2.1 or above.
1. Make sure the headphones are off.
2. Turn on wireless capability on the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than 1 meter away from each other.
5. Press and hold the power button on the headphone until it powers
on but don’t let go just yet. Continue holding down on the power
button until you see the LED indicator flashes blue and red
alternately, which means your headphone is in “pairing mode”
waiting to be paired with your device. You will hear a prompt.
6. As soon as the computer system detects the new device, please
select “Mixcder E7” to pair. Once successfully paired, the LED turns to
solid blue. You will hear a prompt.
To Next Page
Loading...
