Need help?Do you have a question about the Miyachi Amada ISQ20 Series and is the answer not in the manual?
Information about safety regulations, symbols, copyright, and usage.
Notes on ventilation and cable routing for proper installation.
EU Declaration of Conformity for the inverter power supply.
Lists available DC and AC ISQ20 models with their specifications.
Describes the operation using different terminals and key functions.
Details optional displacement sensor usage and specifications.
Details optional pressure/force measuring functions.
Describes components and status display on the front panel.
Shows the rear panel layout for specific models.
Shows the rear panel layout for specific models.
Shows the rear panel layout for the ISQ20-20 model.
Lists all connectors and their basic functions.
Details the RS232 interface for data transmission and software updates.
Defines data output format for AWS3 mode via RS232.
Detailed pin assignments for various connectors (X1, X2, etc.).
Precautions and requirements before starting commissioning.
Guidelines for making electrical connections by qualified personnel.
Instructions for connecting the mains voltage supply.
How to connect secondary cables for current transfer.
Lists abbreviations for connection types.
Diagrams and tables for one-head connections.
Diagrams and tables for two-head connections.
Steps for safely switching on the unit.
Illustrates the chronological sequence for one-head operation.
Sequence diagram for one head with a stroke cylinder.
Sequence diagram for pincers or locking cylinder operations.
Lists unit error codes, messages, and their causes.
Lists sequence error codes and their corresponding causes.
Connection diagram for ISQ20 with pneumatic 1-head.
Connection diagram for ISQ20 with pneumatic 2-heads.
Connection diagram for AWS3 with pneumatic 1-head.
Connection diagram for AWS3 with pneumatic 2-heads.
Wiring diagram for binary inputs/outputs (X1, X2).
Wiring diagram for binary connections (X3, X4).
To Next Page
General