MJX HYPER GO 14210 - Transmitter Battery Installation; Installing Batteries in Transmitter; Front Wheel Assembly; Attaching the Head Wheel Unit

Open the transmitter’s battery cover, insert 2 AA batteries according to the
indicated positive and negative direction, close the battery cover.
将遥控器电池盖打开，按照遥控器指示的正负极，正确装入2节AA电池，再重新盖上电池盖。
Install the Transmitter’s Battery
遥控器安装电池
⑦Fn (CH3 Light control 灯控)
Short Press the “ ” button to turn on/off the
light of high speed car.
短按“ ”按键时，控制高速车灯光开启或关闭。
Install the Head Wheels 抬头轮安装
①Remove the 2 screws
at the rear of the car.
拆下车身尾部2颗螺丝。
②Fix the head wheels into the rear
of the car via 3 screws.
将抬头轮架用3颗螺丝固定在车身尾部。
-9-