Open the transmitter’s battery cover, insert 2 AA batteries according to the
indicated positive and negative direction, close the battery cover.
将遥控器电池盖打开，按照遥控器指示的正负极，正确装入2节AA电池，再重新盖上电池盖。
Install the Transmitter’s Battery
遥控器安装电池
Charge 充电
It is recommended to use a 5V 2A adapter for charging.
●
When charging, the indicator light of charger is green and flashes;
●
When the battery is fully charged, the green indicator light of the charger stays on.
建议使用5V 2A USB适配器进行充电。
●
电池充电时，充电器绿色指示灯闪烁；
●
电池满电时，充电器绿色指示灯常亮。
⑦Fn (CH3 Light control 灯控)
Short Press the “ ” button to turn on/off the
light of high speed car.
短按“ ”按键时，控制高速车灯光开启或关闭。
Adapter 5V 2A (Sold separately)
适配器5V 2A (需另购)
-13-
To Next Page
Loading...
