MKS Baratron DMA Series User Manual

77BS-Device Supervisor Object 7BChapter Four: Operation
82
S-Device Supervisor Object Supported Services
The S-Device Supervisor Object is supported by the seven DeviceNet services listed in Table 49.
Refer to Supported Service Summary, page 103, for more information.
Table 49: S-Device Supervisor Object Supported Services
Service
ID #
(hex)
Service
Name
Parameter
Data
Type(s)
Service
Type Description
05 Reset* USINT Request Places the object into its Initializing
state.
06 Recover*
(start)
none Request Causes the device to transition from
the Abort state to the Operating
state.
07 Abort*
(stop)
none Request Places the device in its Abort state.
0E Get_Attribute_Single* USINT Request Reads the object attribute.
10 Set_Attribute_Single* USINT,
Attribute
Data Type
Request Modifies the object attribute.
4D Lock none Request Restricts access to Read-Only
attributes. Places the device into the
User Mode.
4E Unlock
(Password Protected)
UINT Request Makes Read-Only attributes
modifiable and places the device
into Calibration Mode.
* DeviceNet common services.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MKS Baratron DMA Series Specifications

General

Brand	MKS
Model	Baratron DMA Series
Category	Measuring Instruments
Language	English