Picture 1 Adjust the output
(Picture 1). Press FUNC one time, appear Picture 1, it means
adjust the output, press UP and DOWN, it can adjust 1%~100%
output, press VOLUM, it can jet immediately.
Picture 2 Interval time
(Picture 2). Press FUNC two times continuously , appear Picture
2, it means adjust the interval time, press UP and DOWN, it can
set 1~200s interval time.
Picture 3. Smoke discharge time
（Picture 3）. Press FUNC three times continuously，appear
Picture 3, it means adjust the smoke discharge time, press UP
and DOWN, it can set 1~200s smoke discharge time.
Picture 4. Smoke Output
（Picture 4）. Press FUNC four times continuously，appear
Picture 4, it means adjust the smoke output, press UP and
DOWN, it can set 1%~100% smoke output.
To Next Page
Loading...