MMR SB1000 User Manual


Page|7
41 Daggett Drive, San Jose, CA 95134
Phone: +1 (650) 962 9620 Fax: +1 (650) 962-9647 Email: info@mmr-tech.com Web: www.mmr‐tech.com

HardwareInstallation
Getting Started


Step 1‐ Device ports are easily verified through the welcome screen above. Select the port number the SB1000
Seebeck Controller is connected to (shown as present next to the SB1000) and press 'Poll'. If the SB1000 is
connectedtothatportandpoweredon,itwillrespondwithaDevice
nameandVersionnumber.


Iftheportnumberis not visibletry refreshing theport list by clickingthe refresh  icon above the"Poll''buttons.If
thisdoesnotresolvetheissuetryrestartingthecomputer.Forfurtherassistancecontactyoursystemadministrator
andfinally,theMMRHelpdesk(Seecontact
informationonPage27).

Step2 ‐Select'SeebeckExperiment.'ThiswillloadtheSeebeckexperimentmodule.If thereisnoK2000present,
deselect "K2000' under hardware. This will disable temperature control for all Seebeck experiments.Errors will
occurifK2000remainsselectedwhennotpresent.

Step3‐Press'Begin






MMR SB1000 Specifications

General

Brand	MMR
Model	SB1000
Category	Controller
Language	English