Mobalpa OPTIMA - Maintenance of Components; Drawer Maintenance; Runner Maintenance; Handle Maintenance

6G
• Drawers
- Use a slightly moist microfibre cloth with a glass clea-
ner, then dry immediately with a dry cloth.
- Do not allow water or other liquids to stagnate at the
bottom of the drawer.
• Runners
- No maintenance or greasing is necessary, but
adjustments are recommended for durability of doors.
• Handles
- Only use a slightly moist microfibre cloth with a glass
cleaner, then dry immediately with a dry cloth.
• Hinges
- No maintenance or greasing is necessary, but adjust-
ments are recommended for durability of doors
- Dismantling the hinge
MAINTENANCE OF COMPONENTS
To adjust the Optima drawer, use a Pozidriv
no.2 cross-head screwdriver.
To adjust height (a)
Loosen the two upper screws, adjust the front
using the lower screws, then retighten the
screws to secure it in place.
To adjust width (b)
Push the metal lugs under the front, adjust
the panel, then release the lugs.
To dismantle your drawer, pull it upwards.
Réglages/Adjustement
Amortisseur / Damping
OFF
ON
Z
Y
X
W
1
Z
X
Y
Prestige sliding
drawer panel tilt adjustment
Standard sliding
drawer panel tilt adjustment
a b
b
ADJUSTING THE OPTIMA DRAWER + STANDARD AND PRESTIGE SLIDING DRAWERS
Réglages/Adjustement
Amortisseur / Damping
OFF
ON
Z
Y
X
W
1
Z
X
Y
ALL ABOUT
MAINTENANCE