EasyManua.ls Logo

MobileVision C125 - User Manual

Default Icon
4 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Models: C125 Black
C
125-NMI Black (Non-Mirror Image)
Owner’s/Installation Manual
For Technical Assistance, please call (800) 638-3600,
or visit www.magnadyne.com
Color Rearview
Security Camera
C125-UMIM 4/5/10 1:54 PM Page 2
Question and Answer IconNeed help?

Do you have a question about the MobileVision C125 and is the answer not in the manual?

Overview

  1. Camera Features
  2. Mounting the Camera
  3. Important Technical Specifications
  4. Usage Features
  5. Maintenance Features
  6. Troubleshooting Guide
  7. Warranty

This document is the Owner's/Installation Manual for the MobileVision Color Rearview Security Camera, models C125 (Black) and C125-NMI (Black, Non-Mirror Image).

The camera is designed to provide a broader field of vision during backup, assisting in safe driving. It is intended to be technologically superior and offer years of trouble-free operation. The manufacturer emphasizes that the product must be installed and used in accordance with the manual, and any alterations or misuse that could distract the driver may lead to accidents, injury, or death. Magnadyne Corporation disclaims liability for failures resulting from improper installation or operation.

Camera Features:

The camera unit includes several key components:

  • Built-In Microphone (1): Allows for audio capture.
  • Adjustable Viewing Angle (2): Provides flexibility in positioning the camera for optimal view.
  • Aluminum Die-Cast Waterproof Housing (3): Ensures durability and protection against water, rated IP69K for water resistance.
  • Removable Wind Deflector (4): Helps maintain clear vision in windy conditions.
  • Illumination LEDs (5): Provides lighting for low-light conditions.
  • 1/3" Color CCD Camera Lens (6): The primary imaging component.
  • Photo Sensor (7): Likely for automatic adjustment of illumination based on ambient light.

The camera's cable connections are:

  • +12 Volts (1): Power input.
  • N/A (2): Not specified, possibly an unused or reserved connection.
  • Audio (3): Audio output from the built-in microphone.
  • Video (4): Video output from the camera lens.
  • Ground (5): Electrical ground connection.

Mounting the Camera:

The installation process involves four main steps:

  1. Position Selection: Choose a mounting location free of obstructions and moving parts, ensuring a proper viewing angle of the area behind the vehicle.
  2. Bracket Removal and Drilling: Remove the mounting bracket from the camera. Use the bracket as a template to drill mounting holes and a 5/8" cable pass-through hole.
  3. Bracket Securement: Position the camera mounting bracket, align it with the pre-drilled holes, and secure it with screws.
  4. Camera Installation and Sealing: Insert the camera cable into the pass-through hole. Secure the camera to the mounting bracket. Use silicone to seal the pass-through hole to maintain waterproofing.

Important Technical Specifications:

  • Image Sensor: 1/3" Sharp Color CCD
  • Board Lens: 2.8 mm
  • Resolution: 420 TV Lines
  • S/N Ratio: 48dB (AGC On)
  • Sync System: Internal Synchronization
  • Minimum Illumination: 0Lux (IR LED On)
  • Video Output: 1.0Vp-p 75 ohm
  • IR Project Distance: 15 Meters
  • Water Resistance: IP69K
  • Power Consumption: 300 mA
  • Camera & Bracket Weight: 350g
  • Operating Temperature: -20°C ~ 70°C

Usage Features:

The camera is designed to provide a clear rearview image, enhancing safety during vehicle backup. The adjustable viewing angle allows users to customize the camera's perspective. The illumination LEDs ensure visibility in low-light conditions, and the built-in microphone adds an audio dimension to the rearview feed.

Maintenance Features:

The camera requires minimal maintenance:

  • Lens Cleaning: Occasionally clean the camera lens with a damp, soft cloth to ensure a clear image.
  • Troubleshooting Guide: The manual includes a troubleshooting section for common issues, encouraging users to consult it before seeking repairs.

Troubleshooting Guide:

  • Cloudy Image: Solution: Clean Dirty Camera Lens.
  • No Power / Image: Solution: Check Power Connections.
  • No Sound: Solution: Check Power Connections, Check Microphone for Debris.
  • Upside Down Image: Solution: Check Camera Mounting.
  • Unstable Image: Solution: Check Mounting Hardware, Check Power Connections.

Warranty:

The product comes with a ONE (1) YEAR LIMITED WARRANTY. Magnadyne Corporation or its authorized agents will repair, replace, or refund the retail sales price if the product is found defective in materials or workmanship within one year of sale, provided it was properly connected and operated. The warranty does not cover damage from unreasonable or unintended use, improper maintenance, commercial/industrial operations, servicing by unauthorized personnel, broken security seals, or detached power/plugs. It also excludes labor costs for removal/reinstallation and transportation costs. The warranty does not cover cabinet appearance, accessories, or damage from improper installation, alteration, accident, misuse, abuse, or acts of nature. Magnadyne Corporation is not liable for consequential or incidental damages except as accorded by law. The warranty is non-transferable and extends only to the original purchaser. The manufacturer is not responsible for radio or TV interference caused by unauthorized modifications. Defective merchandise should be returned to the original point of purchase or to Magnadyne Corporation (1111 W. Victoria Street, Compton CA 90220), with prior Return Authorization.

MobileVision C125 Specifications

General IconGeneral
BrandMobileVision
ModelC125
CategoryDash Cameras
LanguageEnglish