For your own safety, wear a helmet and knee pads to protect yourself from falls and injuries
while learning to ride the e-scooter.
The rider assumes all the risks of not wearing a helmet or other protective gear.
• At first use, charge the scooter to 100%. Check the battery indicator, if the battery is low,
recharge it before use. The e-scooter is a device that requires periodic recharging in order to
operate.
• Place the scooter on a flat surface.
• Put your hands on the handlebar. Step onto the platform with one foot and use the other to
give yourself a gentle push.
(For safety reasons, the scooter is initially set up to avoid a standing start).
• When the scooter starts to move, place both feet on the footplate and press the accelerator.
Note: The accelerator will engage once the forward speed exceeds 3 km/h.
• To ride the scooter, tilt your body in the direction of riding when turning and slowly turn the
handlebars.
• To stop the scooter, release the accelerator, press the electronic brake on the left side of
the handlebar and push the rear fender with your foot if necessary.
• To dismount, first stop the scooter completely. Trying to get off the scooter while it is in
motion can cause injury.
• When shifting gears, single click the button to change the speed mode.
• When riding at night or in dark places, double click the button to turn on the lights, and wear
a reflective vest.
17
To Next Page
Loading...