Switch
1) To turn on the electric scooter, press and hold the on/off button for 3 second.
Speed
1) User could control the speed between 1km/h to 35km/hr by pushing the thumb throttle.
Accelerate depend on how much force input to the thumb throttle.
Power/ Battery Display
1) The LCD Screen will show the amount of battery left after your ride.
Distance
1) The LCD screen show the total distance per trip travel or the distance total trip travel.
Head and Rear light
1) When travelling at night, please switch on the head and rear light.
Brake
1) User can brakes the scooter by hold on to the brake lever which connected to the rear electric
disk brake and front disk brake on the left.
Start non-zero start function
1) Turn on the electric scooter
2) The scooter is equipped with non-zero start electric motor system and the brake will switch off
the device. During the starting ride, please first go by your foot slide to let the scooter move
then use the thumb throttle to use the function.
14
To Next Page
Loading...