MOBOTIXMOBOTIX M22 Quick InstallationQuick Installation
X
MOBOTIX
Security-VSecurity-Vision-Systemsision-Systems
.
com
1
2
3
Cam
PC
Manual Part 1
p. 36
Manual Part 1
p. 37
Manual Part 1
p. 36
Manual Part 1
p. 40
Manual Part 1
p. 43
Manual Part 1
p. 37
Prerequisites (MOBOTIX Camera, Standard PC, PoE Switch, CAT 5 Cable)
Connecting the Camera (via PoE Switch)
The First Image in the Camera (in MxControlCenter)
• Free-of-charge download from
www.mobotix.com
• Install application from MSI file
• MxControlCenter automatically
searches the cameras
LED signal:
camera is ready!
CAT 5 cable*
PoE switch*
Camera
PC/laptop*
CAT 5 cable*
*Not part of the standard delivery
CAT 5 cable
PoE switch*
PC/laptop*
Prerequisites Without PoE Switch
Connecting the Camera
(Direct Connection via MX Power Adapter)
The First Image in the Camera (in a Browser on Windows/Mac/Linux)
• Enter your camera's IP address
in the browser address bar
• The IP address of your camera
is printed on a sticker on the
camera housing
LED signal:
camera is ready!
CAT 5 cable*
Camera
PC/laptop*
MOBOTIX
Power Adapter
& power supply*
CAT 5 cable*
*Not part of the standard delivery
CAT 5 cable
MX Power Adapter
& power supply*
PC/laptop*
Prerequisites (Troubleshooting)
Connecting the Camera (Troubleshooting)
The First Image in the Camera (Troubleshooting)
Using PoE switch:
•Does the PoE switch support the IEEE 802.3af PoE standard?
• Is the camera cable connected to a PoE port at the switch?
Using an MX Power Adapter (NPA):
• Is the computer in the same subnet as the camera?
• Is the Power Adapter connectd properly?
(power supply in the "Power" connector, computer in the "PC"
connector, camera in the "Camera" connector)
In MxControlCenter (MxCC):
• Downloaded MxControlCenter successfully from www.mobotix.com?
• Installation completed successfully?
• Camera search in the subnet found the cameras?
• For more information, see p. 64 in the Camera Manual
and in the MxControlCenter User Manual
Display in a browser (Windows/Mac/Linux):
• IP address correctly entered in the browser address field?
•Firewall properly configured and camera port 80 reachable?
•Computer & switch need to have 10/100 Mbps network interfaces
• Using a PoE switch is the simplest method for connecting the camera
• Use the MX Power Adapter if a PoE switch is not available
• Order MOBOTIX accessories from www.mobotix.com or
by phone (toll-free) 1-888-MOBOTIX
To Next Page
Need help?
General
